Metallic effect powder coatings

 

General introduction
Hybrid and polyster type of such kind of powder coating are available. They are suitable for indoor use and outdoor use respectively. This type of powder coating has special decorative effect of luxury appearance, and it can be widely employed in the coating for various top-grade metallic appliances.
Product Series
Products of different gloss are available, high gloss (above 80%), semi gloss (50-80%), flat gloss(20-50%) and no gloss(below 20%). (The gloss can be adjusted according to the customers’ to the demand..
Physical properties of the powder 
Density(g/cm3,25℃):1.4-1.7
Granularity distribution:100%below 100μm(it can be adapted to the specific demand of coating)
Curing Condition
 200℃(workpiece temperature), 10minutes 
Average coating rate
9-12㎡/kg, film thickness:60μm (calculated according to 100% consuming of powder coating)

Coating performance

Testing items
Standards and methods
Inspecting index
Impact strength
GB/T 1732-1993
50kg.cm
 
ERICHSEN TEST
GB 9753-1988
8mm
 
Adhesion
GB/T 9286-1998
Grade0
Bending resistance
GB 6742-1986
2mm
Pencil hardness
GB/T 6739-1996
F-H
Salt mist resistance
GB 1771-1991
>500h
Heat & moisr resistance
GB 1740-1989
 >1000h
Notations
The tests above used the cold rolling steel plate of 0.8mm thick with preceding standard treatment. The thickness of the coaring layer is 50-70μm
2.  the above properly index may slightly vary with the variation of the product types and artistic effects.


 


Changzhou Aisen Powder Technology Co.,Ltd. All rights reserved. 
<友情连结> 常州大东塑料制品有限公司/ 常州市芳琴塑料制品厂/ 常州飞泰塑料有限公司/ Healthy Lifestyle Advice/ 研华/