Anti-static

 

General introduction
Anti-static powder coatings is made from epoxy resin, polyester tesin, conductive filler and metal powder. It is mainly used on occasions like the surgery, computer operating room and precision equipments, which are in need of anti-static effect or static elimination.

Product Series
Conductive powder coating of dark of light colors for indoor use and outdoor use are available
Physical properties of the powder 
Density(g/cm3,25℃):1.4-1.6
Granularity distribution:100%below 100μm(it can be adapted to the specific demand of coating)
Curing Condition
 200℃(workpiece temperature), 10minutes 
Average coating rate
8-10㎡/kg, film thickness:60μm (calculated according to 100% consuming of powder coating)
Coating performance

Testing items
Standards and methods
Inspecting index
Impact strength
GB/T 1732-1993
50kg.cm
 
ERICHSEN TEST
GB 9753-1988
>6mm
 
Adhesion
GB/T 9286-1998
Grade0
Pencil hardness
GB/T 6739-1996
F-H
Salt mist resistance
GB 1771-1991
>500h
Notations
The tests above used the cold rolling steel plate of 0.8mm thick with preceding standard treatment. The thickness of the coaring layer is 60-80μm
2. the above performance index may slightly vary with the variation of the color.


Changzhou Aisen Powder Technology Co.,Ltd. All rights reserved. 
<友情连结> 常州大东塑料制品有限公司/ 常州市芳琴塑料制品厂/ 常州飞泰塑料有限公司/ Healthy Lifestyle Advice/ 研华/