Slim type


General introduction
The coating of slim type is composed of resin and curing agent. It can be used in the coating for aluminium products, tubing, curled steel and so on.
Product Series
Products for indoor use and outdoor use are available
Physical properties of the powder 
Granularity distribution:100%below 100μm(it can be adapted to the specific demand of coating)
Curing Condition
 200℃(workpiece temperature), 10minutes 
Average coating rate
15-20㎡/kg, film thickness:35μm (calculated according to 100% consuming of powder coating)
Coating performance

Testing items
Standards and methods
Inspecting index
Impact strength
GB/T 1732-1993
GB 9753-1988
GB/T 9286-1998
Pencil hardness
GB/T 6739-1996
Salt mist resistance
GB 1771-1991
The tests above used the cold rolling steel plate of 0.8mm thick with preceding standard treatment. The thickness of the coaring layer is 30-40μm
2.the above performance index may slightly vary with the variation of the color.

Changzhou Aisen Powder Technology Co.,Ltd. All rights reserved. 
<友情连结> 常州大东塑料制品有限公司/ 常州市芳琴塑料制品厂/ 常州飞泰塑料有限公司/ Healthy Lifestyle Advice/ 研华/