产品分类

联系我们

公司名称:常州市奔驰宝马游戏平台塑料科技有限公司
地址:江苏省武进高新技术产业开发区龙惠路36号
联系人:孙经理
手机:
电话:0519-86488058
传真:0519-86488068
邮箱:
网址:www.jsasun.com

环氧/聚酯混合型粉末奔驰宝马娱乐网站

当前位置:首页 > 产品应用 > 环氧/聚酯混合型粉末奔驰宝马娱乐网站

环氧/聚酯混合型粉末奔驰宝马娱乐网站

环氧/聚酯混合型粉末奔驰宝马娱乐网站

一 般 介 绍:采用环氧树脂和聚脂树脂为主要原材料制备而成,同时具备两者各自的独特性能,使得生
产出的奔驰宝马娱乐网站膜具有极佳的装饰性、机械性能和较强的耐腐蚀性,广泛应用于各种室内金属制品的涂装。 
产 品 系 列:可提供标准型和低温固化型粉末奔驰宝马娱乐网站产品。可做成高光(80%以上)、半光(50-80%)、平光(20-50%)无光(20%以下)的产品(可根据 用户的需求控制光泽)。 无缝钢管 
粉末物理性能:比重(g/cm3、25℃ ):1.4-1.7粒度分布:100%小于100微米(可根据涂装的特殊要求进行调整)。

固 化 条 件: 标准型         180℃   (工作温度),15分钟
            低温固化       160℃    (工作温度),15分
平均覆盖率:  9-12平方米/公斤,膜厚60微米(以100%的粉末奔驰宝马娱乐网站使用率计算)。

 

Epoxy /polyester powder coatings(环氧/聚酯混合型粉末奔驰宝马娱乐网站)
General introduction
This type of powder coating is prepared from the epoxy and polyester resin . It has the merits of the two coatings, which makes the filmspreapared from this type of coating more decorative and gives it good mechanical properties and anti-corrosive properly . It is widely applied in the coating for indoor metallic appliances.
Product Series
Standard and low temperature solidification type powder coating can be provided. Products of different gloss are available , namely, high gloss (above 80%), semi gloss(50-80%), flat gloss(20-50%) and no gloss(below 20%). (The gloss can be adjusted according to the customers’ to the demand.)
Physical properties of the powder 
Density(g/cm3,25℃):1.4-1.7
Granularity distribution:100%below 100μm(it can be adapted to the customers’ demand)
Curing Condition
Standard type 180℃(workpiece temperature), 15minutes low temp curing type 160℃(workpiece temperature), 15minutes
Average coating rate
9-12㎡/kg, film thickness:60μm (calculated according to 100% consuming of powder coating)
Coating performance

QQ在线咨询
咨询热线
0519-86488058
<友情连结> 常州大东塑料制品有限公司/ 常州市芳琴塑料制品厂/ 常州飞泰塑料有限公司/ Healthy Lifestyle Advice/ 研华/